Lease for as low as $/week
Looking for a partial kit to remotely mount your oil filter or add an oil cooler? This kit allows you to do so with an internal thermostatic valve. You can delete the oil filter / cooler housing, and much of the hoses and obstacles that it creates.
You will receive:
1- GReddy Block adapter (included 10AN fittings)
1- Greddy Remote filter adapter with thermostatic valve (included 10AN fittings)
1 -OEM Nissan oil filter stud
Kit does not include lines or hose ends, you will need to supply your own, The HP series filter is a bypass oil filter, no block mods required . A -10AN oil cooler is recommended.
Routing. Out of engine, to filter housing inlet, out of filter housing to inlet of engine, oil cooler lines to oil cooler (must never be capped).
Note: The K&N HP series filters have internal pressure relief valves, there is no need to drill out the block plug and install and OEM after removing the oil warmer. Please only use K&N filters.
We recommend using Koyo Oil coolers found here.